To max out the CPU, you will need between 1.7V and 1.83V. For LN2 overclocking: the CPU core and cache now use the same voltage rail, so you cannot configure it independently. The highest available DRAM Ratio is DDR4-4133. Also note that the tRCD is tied to tRP and must be in sync, hence why there's only one option to control them. Setting both to 1.12V should be sufficient for DDR4-3500. For DRAM overclocking, the most important rails are VCCIO and VCCSA. 350 MHz BCLK should be pretty easy on air cooling. Level 6 PLL Bandwidth combined with 1.45V PLL Termination should give you decent margins. For BCLK overclocking: focus on the PLL Termination Voltage (or the linked CPU standby Voltage) and PLL Bandwidth. It also helps you understand the functionality of the USB ports near the PS2 connector, how to install Windows XP from a USB driver, how to get XTU working in Windows 7. The OC guide is very comprehensive and includes topics on BCLK, DRAM, Core/cache frequency, and LN2 overclocking. The thread also includes a link to an overclocking guide dedicated to the Maximus VIII series. That includes not only overclocking software like ROG Connect Plus, Turbo V, and MemTweakIT, but also handy tools to install XP from a USB drive and the AHCI XP driver. In a thread over at our dedicated Skylake Z170 subforum, Coolice from ROG has shared everything you need to get going with the Maximus VIII motherboard series.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |